Hydrodynamic Flow of a Nanofluid in an Entropy-Optimized Porous Medium
Loading...
Files
Date
2026-09-13
Journal Title
Journal ISSN
Volume Title
Publisher
University 20 Août 1955 - Skikda
Abstract
Wavy walls, fins, porous materials, and nanofluids are widely employed as passive enhancement
techniques to improve the efficiency and thermal performance of heat exchangers and heat sink systems.
The present study investigates the thermal characteristics of nanofluid flow within a wavy channel
partially filled with porous material. Two porous material structures commonly used in thermal
engineering, packed granular media and porous foam, are numerically simulated and comparatively
analyzed. The channel geometry consists of three sections, with a porous layer partially occupying the
intermediate corrugated section. The physical model is based on a two-dimensional, laminar Darcy–
Brinkman–Forchheimer formulation for nanofluid flow, coupled with a local thermal equilibrium (LTE)
model for heat transfer that incorporates the viscous dissipation effect.
Numerical solutions are obtained using the ANSYS Fluent software, employing the finite volume
method on appropriately generated computational meshes. The numerical results are validated against
available theoretical, numerical, and experimental studies. Simulations are conducted for silver–water
nanofluid flow in a wavy channel partially filled with a copper porous material. The coupled effects of
the porous layer thickness () and the Reynolds number (𝑅𝑒) on the Nusselt number, entropy
generation, friction factor, and performance evaluation criterion are systematically analyzed.
The results demonstrate that both the porous insertion thickness and the porous material structure
have a significant impact on the hydrodynamic and thermal performance of the channel. This influence
is more pronounced for packed granular materials than for porous foam. For instance, at 𝑅𝑒 = 400 and
within the porous thickness range of = 0.2– 0.5, the packed granular material yields increases of
43.04–134.64% in the Nusselt number and 97.68–437.06% in entropy generation compared with the
clear channel. In contrast, the corresponding enhancements for metal foam are more moderate, reaching
36.19–94.53% for the Nusselt number and 70.83–197.90% for entropy generation.
Furthermore, as an extension of this work, a numerical investigation of heat transfer and
entropy generation was carried out for a convergent–divergent plate channel heat exchanger.
The results indicate that the shrinkage thickness parameter significantly enhances both heat
transfer and entropy generation. At 𝑅𝑒 = 500, compared with a straight channel, a convergent–
divergent channel with a shrinkage thickness parameter of 0.8 exhibits increases of 82.7% in
the average Nusselt number and 212.6% in the average entropy generation.
Accordingly, substantial improvements in heat transfer performance in wavy porous
channels can be achieved through the combined effects of the Reynolds number and porous
layer thickness. This study therefore aims to provide a comprehensive reference for the
thermal–hydraulic performance of straight and wavy porous-duct heat exchangers.
Description
Keywords
Nanofluid, Entropy-Optimized Porous Medium